Ferrite Magnet Automatic Hydraulic Press

Technical Specifications of YF-300T Ferrite Magnet Hydraulic Press

Components of the machine: press (including magnetized wire package), hydraulic pump station, electric control cabinet, injection and mixing system, vacuum tank; mold frame, automatic blank taking off machine.

Basic technical specifications

1. YF-300T adopts the oil pump servo system and the oil temperature does not need any cooling, ensuring the pressure, speed and stability when the press is used continuously for a long time;
2. Low energy consumption and power saving. The magnetizing system uses air-cooled wire pack 150A current to reach 100,000 ampere turns, which is 75% energy-saving compared to the domestic 300-ton press 500A current magnetizing current 100,000 ampere turns;
3. The main body is a casting body, the upper and lower worktables, and the base are castings; the mold base, the magnetized wire wrapped iron core, etc. are all cast steel parts. High mechanical strength and compact structure, which is convenient for manual or automatic blank taking;
4. The main unit is a four-column structure, using an overhead air-cooled wire package,
5.  Adopt touch screen to realize man-machine interface, debugging is convenient and fast;
6. Satisfy low-water content slurry (34% water content) automatic injection, stable and reliable suction.
7. The parallelism of the upper table to the mold mounting seat is within 0.15 / 300 × 300.
8. The verticality of the upper table movement to the mold mounting seat is within 0.20 / 200 of the front and side;
9. The parallelism of the lower cylinder ejection surface to the mold mounting seat is within 0.10 / 150 × 150.

10.