H Frame 4000 Ton Metal Deep Drawing Hydrualic Press Machine For Thick Metal Plate
ZHENGXI thick metal plate ,sheet metal deep drawing press also called metal forming press,hydraulic deep drawing press, it is widely used for metal deep drawing,stamping, punch of metal sheet for train automobile kitchenware and household appliance industries.ZHENGXI deep drawing press adopts Europe technology,the speed and pressure has been well adjutable by using servo system.
Specification
Stamping & Deep drawing hydraulic presses have multi-function can process sheet metal including technology like deep drawing, stamping, bending, cutting and flanging. It can apply on almost ALL kinds of forming technology, so it also be called as Universal hydraulic press. Usually it can be used on following technology.
Metal sheet (thickness<3mm) deep drawing, bending, flanging, cold extrusion, cutting
Metal Plate (thickness>3mm) deep drawing, bending, flanging, cold extrusion, cutting (ZHENGXI Special Design)
We are able to custom manufacture hydraulic metal stamping presses in a wide range of sizes and capacities as per customers’requirement. Production line included 1000T 800T 600T, below basic data is only for reference.
|
Name |
Unit |
Value |
Remark |
|
|
Name of machine |
|
Hydraulic Press |
|
|
|
Model |
|
Yz27-4000T/1000T |
|
|
|
Main cylinder pressure |
KN |
40000 |
|
|
|
Cushion force |
KN |
10000 |
|
|
|
Max. liquid pressure |
MPa |
25 |
|
|
|
Daylight |
mm |
2500 |
|
|
|
Main cylinder Stroke |
mm |
1800 |
|
|
|
Worktable size
|
LR |
mm |
5000 |
T groove width 28mm |
|
FB |
mm |
3000 |
Height 600mm |
|
|
Slider speed |
Down |
mm/s |
400 |
|
|
Return |
mm/s |
400 |
|
|
|
Working |
mm/s |
42-17 |
|
|
On Site Service
Machine Features
- 1) The H frame hydraulic press adopts the integral steel plate welded frame type frame. The overall rigidity is good, the compressive strength is high, the fuselage type variable is less than 1/5000, and the scrap rate of large parts is extremely low, which can greatly reduce the mold cost.
- 2) The overall structure is strong, the four-corner and eight-sided guide rails are not easy to shake, and the anti-loading ability is strong, and the anti-loading capacity reaches 300mm.
- 3) Fast speed, the fastest drop speed can reach 700mm/s, and it can quickly position and pressurize without impact. After clamping, the pressure is fast and no impact.
- 4) H Frame hydraulic press is suitable for stamping, forming, stretching, shaping, overmolding and trimming of metal or non-metal parts.
Optional Function
- 1) Moving Bolster / Die Change Trolley
- 2) T-slots on slide or bolster
- 3) Stamping Dampers for shock proof while stamping
- 4) Ejectors on slide or bolster
Servo System
Servo System Composition
Advantages of Servo System
- Energy saving
Compared with the traditional variable pump system, the servo oil pump system combines the fast stepless speed regulation characteristics of the servo motor and the self-regulating oil pressure characteristics of the hydraulic oil pump, which brings huge energy saving potential, and the energy saving rate can reach up to 30%-80%.
Efficient
The response speed is fast and the response time is as short as 20ms, which improves the response speed of the hydraulic system.
Hydraulic Control System
The hydraulic system adopts integrated cartridge valve control system with fast response speed and high transmission efficiency.
All motors, pumps and pipes are fitted based on advanced Europe technology to achieve shock-resistance.
ZHENGXI Hydraulic Press is an ISO:9001, CE certified company, we offer you various hydraulic press machine and other series of composites molding press. Contact us and get a detail on our machine.
